Wednesday, June 15, 2011

Bedside Tables

When I moved into my new place a few years ago, I was adventurous enough to build my own bedside tables - and by build, I mean stacking moving boxes filled with books and other non-essential items. It takes talent to balance a lamp at just the right angle of a drooping box top!

It wasn't until a few months later that I found a liquidation store that sells used furniture. Recently, it's been described as a place where hotel furniture goes to die, but the furniture has potential, options are endless, and the prices don't hurt either. These were a little rough looking, but I liked them - not to mention they were the perfect size.








It only took me 18 months to finally realize they needed a little updating. I went to Home Depot, picked out my paint, and by the end of the week, I could barely look at them anymore.



I first removed the knobs and lightly sprayed them with Rustoleum Metallic Satin Nickel...



And after removing the doors, drawer and lightly sanding down the tables, I painted them with a green base coat, using a dry brush technique around the details to accentuate them.



I topped with a coat of Behr Paris Grey.


I rubbed a dark brown tinted faux glaze around the accents to give it an antique look. 


Not all furniture is meant to die in a liquidation warehouse!



Kristin

Tuesday, June 14, 2011

My First Salvage Find

The first time I went to the local salvage store, I had no idea what I was going to find. All I knew was that I wanted a door to make a headboard for my master bedroom. My ability to see past dingy wasn’t as fine-tuned as it is now, but the first thing I saw was a dingy carved door.

$80 was a steep price for me, especially for a salvage yard door. But it was better than what I was looking for. I was sold.

I spent a few nights sanding, cleaning and staining the door. It was almost ready to mount on the wall, except the bottom of the door needed about 6” chopped off to make it even with the top – so I borrowed a circular saw from work. . I set up a guide using a strip of wood and some clamps to get a straight line.  


Measure the distance from the blade to the fence to ensure you're cutting at the right spot




At this point, I had just gotten my compound miter saw (best for cuts less than 10” long) from amazon.com and was hesitant using that. You would have never guessed I was nervous after seeing my excitement the night it arrived – here’s proof – apron and all!

January 2010
 
With hesitation, safety goggles, and one eye shut (like I was watching a horror movie) I put the circular saw to the door and started cutting. About 10 seconds later, it was over - and I had a straight line! Victory!

Since the door is solid wood and HEAVY, I used my miter saw to make French Cleats (pieces of wood cut at a 45 degree angle that provide a sturdy mount for heavy objects.) I found this image online for the best diagram.

From www.newwoodworker.com


I sanded the saw-cut until it was smooth and put on a few coats of stain, I chose not to varnish it because wanted a rustic, country feel.



I love the character of my headboard!

Kristin

Monday, June 13, 2011

May Makeover (Part II) and a Thank You

First off, thanks for all the feedback. It is VERY much appreciated! Per several requests, I plan on revisiting some of the techniques I use during my building phases and provide detailed tutorials for those who are interested. I also plan to create an Etsy account for pieces that are ready to find a new home. Stay tuned!



Now, back to the good stuff…

When I bought this piece, it started to fall apart as soon as my boyfriend and another guy lifted it up it to move. The top was worn with deep scratches and there was water damage throughout. My boyfriend said, “Uh, hun, are you sure about this?” I just said, “Keep going.”

This is a "during" shot, I apologize for not having a "before" shot.



The packaging tape used to hold a make-shift drawer together was a nice touch as well.

But the Hallmark calendar card from 1970 I found in the frame actually was a nice touch.


I made replacements for the warped drawers and cabinet linings with 5.2MM hardwood. The warped linings were used as a template and a jig-saw cut the pattern.


I had to break apart the dovetail joints on all sides of the drawers with a rubber mallet in order to replace the lining. (I used a rubber mallet to prevent denting or splitting the wood like a hammer would.) Some clamps and wood glue bonded it all together. The drawers now slide in and out instead of jumping from side to side.

Sometimes, my clamps aren't large enough for my projects, so I link them together as shown.



The cabinet lining doesn’t droop anymore either. I sanded the rough jig-saw cuts with a sander to remove the splinters and to also help the board fit in the grooves. 



After a lot of sandpaper, wood glue and elbow grease, it started to come together. I played around with a few color combinations while I was working to see what would work best. 





I wanted a 2-toned piece in order to show the quality and richness of the wood top, and planned on painting the base all cream to accentuate the details, but it was getting late - the finishing touches were going to have to wait until the next day. 



My plan was to finish painting the frame cream and put it up for sale…but I moved it into my dining room before heading to bed.





She was the missing piece for my dining room. The colors help tie the whole room together. And so much work went into this piece; I couldn’t bear to let her go! In sum, I’m sorry to say, this one’s mine. 



Sunday, June 12, 2011

May Makeover

I’m thankful that I don’t judge based on first impressions.
This chair was posted as “Pretty in Pink.” Eh, not so much...



The fabric was so awful that I stripped it off the night I brought it home.



The next night, I sanded down all the wood, primed it with a base coat of a soft aqua and topped it with grey paint  I sealed it with a wipe-on poly to add a soft sheen to the frame.



I reupholstered it and finished it off with some decorative trim. This was my first reupholstery project! It took some time to get it right, but it was worth it. With much hesitation, I posted it for sale.  At least it went to a good home. 



 Kristin